There is no water in vacuum tube the system can work as usual even if there is one tube broken
Tank can bear the pressure of 0.7mpa.
Test pressure is 1.0mpa.
You still can get hot water on second floor if you install solar water heater on the floor.
|
Model No |
DM-SH118 |
|
Inner tank |
Thickness 1.2mm/ sus316 1.2mm |
|
Out tank |
zinc steel plate 0.4mm/ stainless steel 0.4mm |
|
Bracket |
Zinc steel plate 1.5mm/ stainless steel 1.2mm |
|
Insulation |
High density polyurethane foam 50mm/55mm/60mm |
|
Frame degree |
0 degree-45 degree. Dual-purpose frame for both flat and inclined roof |
|
Inner tank size |
Inner tank diameter with 370mm |
|
Out tank size |
Outer tank diameter with 470mm |
|
Vacuum tubes |
Tri- element tubes 58*1800/47*1500 |
|
Capacity |
150L |
|
Holding time |
72Hours |
|
Hail resistance |
25mm |
|
Max. Fluid pressure (Pa) |
0.6mpa |
|
Operating fluid pressure (Pa) |
0.6mpa |
|
Test pressure |
1.0mpa |
|
Heat pipe |
90mm length condenser, 14mm diameter body, thickness:0.6mm |
|
Warranty |
More than 5 years |
|
Application |
Outdoor, Hotel, Household |
|
Power Source |
Electric, Solar |
|
Type |
Evacuated Tube |
|
Circulation Type |
Direct / Open Loop (Active) |
|
Installation |
Freestanding |
|
Housing Material |
Stainless steel |
The vacuum tubes absorb sunlight and get heat, then transfer heat to heat pipe via aluminum fin.
Then heat pipe transfer heat to the tank by condenser after many hours, water in tank will be hot.
Your name:
Your email address:
Your message:
Reviews
There are no reviews yet.